Franka Emika Panda - Initial Power On Procedure

Franka Emika GmbH © October 2018
104

Switching on
WARNING
WARNING
Devices can be very cold aer transport and may develop condensaon when
being placed in warmer surroundings with higher humidity. Wet devices can
lead to a short circuit and may present the risk of electric shock.
Therefore:
Leave devices to acclimaze aer transport
Do not switch on wet devices
The system may only be used in perfect technical condion and as intended,
in a safety-conscious manner and aware of any dangers, while observing the
instrucons in the present documentaon. Malfuncons compromising safety
must be eliminated immediately.
Switching on wet devices can not only lead to life-threatening injuries, but
can also cause material damage.
Therefore:
Leave devices to acclimaze aer transport
Do not switch on wet devices
NOTICE
Now you may switch on Panda for the first time:
• Make sure that the external power supply is provided.
• Now switch on the Control. The power switch is located on the back of the
Control.
Switching on