EasyManuals Logo

Franke F3D3P Operator's Guide

Franke F3D3P
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
03 / 2011Last revised: Technical modifications excepted!
en
11 BASIC TROUBLESHOOTING
11.1 COMMON DISPLAY ERROR MESSAGES & CORRECTIVE ACTIONS
DISPLAY SCREEN ERROR MESSAGE CAUSE/ACTION
Low Product Warning
1. Add fries to hopper
or:
2. Continue dispensing until Error Message 4 appears.
Error 2 – No Bucket
1. Check assembly of rubber dispense bucket and loading doors.
2. Press flashing button under word: Reset.
Error 4 – Hopper Empty
1. Hopper is empty. Fill with fries
or
2. Check Hopper for a bridge of frozen fries.
3. Press flashing button under word: Reset.
Error 7 – Doors Stuck
1. Check rubber Hopper and doors for obstructions.
2. Press flashing button under word: Reset.
10 LONG PERIODS OF NON-OPERATION
Turn off the unit with the main switch or pull the plug out.
Remove all food from the unit, clean the interior and accessories.
Leave the doors and drawers slightly open so that the air can circulate properly.
Use a cloth to apply a thin protective layer of Vaseline oil on the metal surfaces, and air the interior regularly.

Other manuals for Franke F3D3P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Franke F3D3P and is the answer not in the manual?

Franke F3D3P Specifications

General IconGeneral
BrandFranke
ModelF3D3P
CategoryDispenser
LanguageEnglish

Related product manuals