5
03 / 2011
Last revised: Technical modifications excepted!
en
The unit must be installed by qualified personnel in accordance with the manufacturer’s instructions.
If there is a fault or malfunction, disconnect the unit from the power supply. Any necessary repairs must be carried out by qualified
technicians.
Only use original spare parts.
Non-compliance with these instructions could affect the safety of the unit, and as a result, the manufacturer’s guarantee
is no longer valid.
An analysis or repair of the coolant system is expressly forbidden.
1.1 GENERAL NOTES
This unit is a technical appliance that is intended exclusively for use during work.
The unit must only be used for the temporary frozen storage and batch dispensing of French fries at commercial restaurants only.
Any other use is deemed as inappropriate.
1.2 INTENDED USE
1.3 WARNING AND PROHIBITION SIGNS
The F3D3P Freezer/Dispenser may NOT be used for long term storage, only temporary storage of
frozen product between walk-in freezer and fry station. This unit may only be used for its intended
purpose.
The F3D3P Freezer/Dispenser is designed for installation and operation indoors, in a restaurant
kitchen area protected from weather, excessive heat, excessive humidity and corrosive salt air.
Hazard warning sign:
Warning of dangerous, flammable
materials
Hazard warning sign:
Warning of danger electricity
Prohibition sign:
Smoking and open flames forbidden
Prohibition sign:
No access for unauthorized persons
Prohibition sign:
No repair and maintenance work by
unauthorized persons
Hazard warning sign:
General Warning
To Next Page
Loading...
Need help?
General
