Franke Smart User Manual

– 7 –
FMO 45 GN 81 / FMO 45 GN 86
EN
INTENDED USE
This product has been designed for domestic
use. Commercial use isnot permitted. This
appliance may only beused for cooking
purposes. It shall not beused for other
purposes like heating aroom. This appliance
shall not beused toheat plates under thegrill,
drying clothes ortowels by hanging them on
thehandle orfor heating purposes.
The manufacturer assumes no responsibility
for any damage due tomisuse ormishandling.
Oven part oftheunit may beused for thawing,
roasting, and grilling food.
Operational life oftheproduct you have
purchased is10 years. This istheperiod
for which thespare parts required for
theoperation ofthis product as defined
isprovided by themanufacturer.
Electrical Connection
This oven must beinstalled and connected
correctly according tomanufacturer
instructions and by anauthorized service.

Appliance must beinstalled inanoven
enclosure providing proper ventilation.

Electrical connections oftheappliance
must bemade only via sockets having earth
system furnished incompliance with rules.
Contact anauthorized electrician ifthere
isno socket complying with theearthed
system at where appliance will beplaced.
Manufacturing company isby no means
responsible for damage resulting from
connection ofnon-earthed sockets
to appliance.

Plug ofyour oven must beearthed; ensure
that socket for theplug isearthed. Plug
must belocated inaplace that can
beaccessed after installation.
Your oven has been manufactured as
220-240V 50/60 Hz. ACpower supply
compliant and requires a16Amp fuse.
ifyour power network isdifferent that these
indicated values, refer toanelectrician oryour
authorized service.
When you need toreplace theelectrical fuse,
please ensure that electrical connection
ismade as follows:
– Phase (to live terminal) brown cable
– Blue cable toneutral terminal
– Yellow-green cable toearth terminal

Oven disconnecting switches must be
in anaccessible place for final user while
oven isin its place.

Power supply cable (plug incable) mustn’t
touch hot parts oftheappliance.

If supply cord (plug incable) isdamaged,
this cord must bereplaced by theimporter
orits service centre orequally competent
personnel toprevent ahazardous situation.

Franke Smart Specifications

General

Energy Efficiency Class	A
Number of Functions	8
Voltage	220-240 V
Installation Type	Built-in
Color	Stainless Steel
Control Type	Electronic
Cooling Fan	Yes
Door	Double Glazed
Child Lock	Yes
Timer	Yes
Type	Built-in
Frequency	50/60 Hz