Franke Smart User Manual

FMO 45 GN 81 / FMO 45 GN 86
– 14 –
EN
Semi automatic cooking
This cooking program isintented tostart
cooking immediately for aspecified duration.
After theoven isset tothedesired function
and Temperature via theoven knobs:

Press the button twice, symbol
will flash on thescreen and
duration ofcooking will show on thescreen
one after another.

Using or buttons, adjust thedesired
cooking duration.

After 6 seconds of the last button push
or by pressing twice, theadjustment
iscompleted. will besteady on
thescreen and thedisplay shows
thecurrent time ofday.
Full automatic cooking
This cooking program isintented toperform
adelayed cooking by programming thetime
ofday, when thefood should beready.
inother words, theoven will start cooking not
immediately but will automatically calculate
thetime tostart cooking.

Perform step 1and 2of thesemi auto
cooking as above (cooking
duration adjustment).

Press button once again, symbol
will flash on thescreen and duration
ofcooking will show on thescreen one
after another.

Using or buttons, adjust thedesired
end ofcooking time. symbol will
disappear but symbol will bestill
flashing on thescreen. This indicates that
anautomatic cooking isprogrammed but
cooking has not started yet.

After 6seconds ofthelast button push
orby pressing , theadjustment
will becompleted, thedisplay shows
thecurrent time ofday.
Auto cooking end
After theautomatic cooking has been
completed, symbol will beflashing on
thescreen and thebuzzer alarm will sound.
Any button press will stop thealarm sound but
theflashing symbol will go on till button
is pressed. thebuzzer alarm will sound for
7minutes ifnot stopped.
Power interrupts

After any interrupt ofmains power, your
oven will beinactive after thepower
isrestored, for safety reasons.

After power on, thetime digits and
symbol will flash and thetime has
tobeadjusted.
Note: theflashing symbol indicates that
theoven isinactive and you have toenter
themanual mode.
Child lock
This function isintented toprevent any
unauthorized modification ofthetimer settings.

This function will beactive, within
30seconds after thelast button press.
will appear.

To deactive it, press the button for
3seconds. will disappear.
Programmable options
Alarm tone

Pressing and holding the button for
3seconds will result inthecurrenly
valid buzzer tone being produced.

By pressing and buttons, you
may scroll through 3available
buzzer tones.

The last heard buzzer tone will
beautomatically recorded as the
selected tone.

After 6seconds ofthelast button push
orby pressing ,
the adjustment iscompleted.
Brightness setting
Pressing and holding the button for
3seconds will result inthecurrenly valid
brightness setting being showed. By pressing
and buttons, you may scroll through
8available brightness setting. Thelast seen
brightness setting will beautomatically
recorded as theselected setting.

After 6seconds ofthelast button push
orby pressing , theadjustment
iscompleted.
Note: Default settings are highest.
Note: Programmable options are nonvolatile
and will beresident after any power failure.

Franke Smart Specifications

General

Energy Efficiency Class	A
Number of Functions	8
Voltage	220-240 V
Installation Type	Built-in
Color	Stainless Steel
Control Type	Electronic
Cooling Fan	Yes
Door	Double Glazed
Child Lock	Yes
Timer	Yes
Type	Built-in
Frequency	50/60 Hz