Freecom Network Drive User Manual

11
EN
3
Configuration of the Freecom Network Drive
Chapter 3: Configuration of the Freecom Network Drive
For easier access we recommend using the PC configured as DHCP Client as described
in the previous chapter.
As default, the DHCP Server of the Freecom Network Drive is switched on. This can be
changed in the “Status” section of the web configuration.
3.1 The Freecom Network Storage Assistant
Windows users can use the “Freecom Network Storage Assistant” to configure the Free-
com Network Drive. This tool offers the following functions:
Accessing your Network Drive web interface
When you click this menu item, the web interface for your Freecom Network Drive opens
in your default browser.
Adding and removing shared folders
You can assign a drive letter to shared folders on your Freecom Network Drive. This allows
you to access to the files in Windows more quickly.

Freecom Network Drive Specifications

Capacity and Interfaces

capacity	250GB, 400GB, 500GB
LAN interface speed	10/100Mbps
USB interface speed	USB 2.0

Hard Drive Specifications

hard drive type	3.5” SATA
average seek time	< 9 ms
track to track seek time	0.8 ms
average latency	4.2 ms
rotational speed	7200 rpm
buffer size	8MB or higher

Data Transfer Rates

LAN data transfer rate	max. 100 Mbit/s
USB data transfer rate	max. 480 Mbit/s

Operating Environment

operating temperature	5º C / 60º C
storage temperature	-20º C / 80º C
mtbf	50000 POH

Weight and Dimensions

weight	1150 gr. / 40.6 ounce
dimensions	21.1 x 11.5 x 3.7 cm / 8.3 x 4.5 x 1.45 inch