Freecom Network Drive User Manual

5
EN
General Information
Precautionary measures
To ensure that your Freecom Network Drive functions properly, please take note of the
following precautions. If these are not followed, you may void your warranty and dam-
age the Freecom Network Drive.
• Safely remove the Freecom Network Drive via your operating system (the "unplug or
eject hardware" option in the Windows taskbar) before disconnecting the USB cable
or power cable and before switching off the device. Failing to do so may result in
data loss.
• Do not drop the Freecom Network Drive or expose it to other kinds of sudden me
-
chanical shocks as this may result in data loss and damage to the Network Drive.
• Do not use the Freecom Network Drive when the ambient temperature is below 10°C
or above 35°C.
• If the Freecom Network Drive is moved from a cool environment to a warmer envi
-
ronment, please allow the drive to acclimatize to the ambient temperature before
operating the device. Failing to do so may lead to condensation within the drive
enclosure, which in turn may cause the drive to malfunction.
• Do not place liquids or drinks on the Freecom Network Drive. When liquids are spilled
and get in contact with the electronics within the drive enclosure, it will damage the
drive and will cause the drive to malfunction.
• Do not use the Freecom Network Drive in a dusty environment. Dust inside the
enclosure may damage the internal electronics and result in drive malfunction.
• Only use the power adapter that was supplied with the Freecom Network Drive.
• Opening the Freecom Network Drive will void the warranty.
• Since USB 2.0 is backwards compatible with USB 1.1, the Freecom Network Drive
can be connected to all USB ports. When connected to a USB 1.1 port, however, the
performance (data transfer rate) of the Freecom Network Drive will be much lower
than when the drive is connected to a USB 2.0 port.

Freecom Network Drive Specifications

Capacity and Interfaces

capacity	250GB, 400GB, 500GB
LAN interface speed	10/100Mbps
USB interface speed	USB 2.0

Hard Drive Specifications

hard drive type	3.5” SATA
average seek time	< 9 ms
track to track seek time	0.8 ms
average latency	4.2 ms
rotational speed	7200 rpm
buffer size	8MB or higher

Data Transfer Rates

LAN data transfer rate	max. 100 Mbit/s
USB data transfer rate	max. 480 Mbit/s

Operating Environment

operating temperature	5º C / 60º C
storage temperature	-20º C / 80º C
mtbf	50000 POH

Weight and Dimensions

weight	1150 gr. / 40.6 ounce
dimensions	21.1 x 11.5 x 3.7 cm / 8.3 x 4.5 x 1.45 inch