* USB 2.0 is backwards compatible with USB 1.1.
General Information
Your system needs to meet the following hardware and software requirements for the
device to function properly.
System requirements
To use the Freecom Network Drive, you will require the following components:
• Intel/AMD CPU 700 MHz or faster
• 256 MB RAM or higher
• CD ROM drive for installing the software
• Free USB 2.0 or USB 1.1. port* or
• 100Base-T full duplex connection for Ethernet mode
• Internet connection for registering warranty online and downloading software
updates.
• Operating system: Windows 2000, Windows XP
To Next Page
Loading...
