Maintenance and Repair Work
A 66/73 STUN-E512_E3__EN.DOCX
www.freund-germany.com
6 Maintenance and Repair Work
To ensure a long service life and low wear, the machine must be regularly
checked and maintained.
The work area on the workbench must be clean and free from foreign
material for all maintenance or dismantling work.
Repair and maintenance must only be carried out by skilled and authorized
qualified personnel.
Warranty
If faults or defects are detected on the machine during the legal warranty
period, contact our sales staff. Please refer to the company information at
the imprint for address and telephone numbers.
Only use original spare parts or spare parts recommended by FREUND
Maschinenfabrik.
Modifications to the machine are not permitted. Non-observance of the
above will invalidate all liability and warranty claims against FREUND
Maschinenfabrik.
For maintenance and repairs, use only measuring instruments with
protective insulation. The internal resistance of the connected measuring
instrument must be at least 100 kOhm.
6.1 Safety information
WARNING!
Risk of accident caused by insufficiently qualified
personnel.
Danger to life and risk of very serious injuries.
The stunning device may only be operated, serviced
and cleaned by instructed and authorised service
personnel.
Maintenance work on live components must only be
performed by trained electricians.
6.2 Personal protective equipment
To prevent injury, always wear the following personal protective
equipment:
Hand protection
Foot protection
To Next Page
Loading...