STARTING UP
© frifri Aro SA 4-2 OM - 1.0 - 25.10.2004
4.3 Orderly start-up
An orderly start-up assumes that the deep fryer has not been disconnected from the power circuit.
After checking the frying vessel and the oil catchment tank (and if necessary the frying oil pump and the frying basket lift)
the deep fryer can be switched on.
4.4 Restarting after a malfunction incident
Restarting after a malfunction assumes that the deep fryer has not been disconnected from the power circuit, if ...
> ... the safety thermostat has triggered.
> ... the safety thermostat has been reset.
Restarting after a malfunction assumes that the deep fryer has been disconnected from the power circuit if necessary, if ...
> …the maintenance request (spanner) has appeared on the display.
> …after switching on/off, the maintenance request (spanner) is still displayed.
> ….a service technician has rectified a defect on the appliance on the basis of the maintenance request (spanner).
After checking the frying vessel and the oil catchment tank (and if necessary the frying oil pump and the frying basket lift)
the deep fryer can be switched on again.
To Next Page
Loading...