2.5 Design Information
It is forbidden to carry out modifications to the boiler or to change or
deactivate safety equipment.
Always comply with all fire, building, and electrical regulations when
installing or operating the boiler system, and follow the operating
instructions and mandatory regulations that apply in the country in
which the boiler is operated.
2.5.1 Heating System Installation/ Standards
The boiler should be operated in a closed heating system. The following
standards govern the installation:
Applicable standards:
ÖNORM / DIN EN 12828 Heating systems in buildings
Each heating system must be officially approved.
The appropriate supervisory authority (inspection agency) must always
be informed when installing or modifying a heating system, and
authorisation must be obtained from the building authorities:
- Austria: Report to the construction authorities of the community or
magistrate
- Germany: Report new installations to an approved chimney sweeper
/ the building authorities.
2.5.2 General information for installation room (boiler room)
Boiler room characteristics
There must not be a potentially explosive atmosphere in the
boiler room as the boiler is not suitable for use in potentially
explosive environments.
The boiler room must be frost-free.
The boiler does not provide any light, so the customer must
provide sufficient lighting in the boiler room in accordance with
national workplace design regulations.
When using the boiler above 2000 metres above sea level you
should consult the manufacturer.
Danger of fire due to flammable materials!
No flammable materials should be stored near the boiler. Flammable
objects (e.g. clothing) must not be put on the boiler to dry.
Damage due to impurities in combustion air!
Do not use any hydrogen halides or any cleaning agents containing
chlorine in the room where the boiler is installed.
Keep the air suction opening of the boiler free of dust.
§
To Next Page
Loading...
