This bill of material, with the aid of illustrations, all the parts used in the TP-601D series.
When ordering, kindly submit a list using the descriptions, part no.s, and quantities as
indicated.
EXPLANATION OF BILL OF MATERIAL
The following instructions are designed to assist you when ordering parts.
1. The parts are illustrated, with indication of their part no.s.
2. As far as the contents or the book are concerned, only the assembly parts
are described, e.g. unit, group, set, etc.
3.
(a) If you want to order the strapping head unit on page 1, please indicate the no. at
the top of the page. (T6-1-90004, T6-1-90007)
(b) If you would like to order the tension group (in the strapping head unit), indicate the
no.on page 1 corresponding to tension group. (T6-1-60003) For further details
on the tension group see page 19.
(c) If you would like to order the whole tension arm assembly, then indicate no.
(T6-1-61001) on top of page 21.
(d) If you would like to order a tension jaw spring only, then indicate the no.
corresponding to the spring on page 21. (T6-1-61140)
4. Part no.s are to be understood as follows (parts exclusively used for TP-601D
seried machine.)
Please find T6-1-10110 as an example below:
T6………………………………………………MODEL NO.(TP-601D)
1………………………………………………..UNIT NO. (STRAPPING HEAD UNIT)
10110…………………………………………..PART NO. (TENSION CAM)
To Next Page
Loading...
