a. Please turn off the power before opening the top plate.
b. Please do not touch the heater due to the high temperature.
c. Be careful with the heater if you open the upper top plate.
(6) Maintenance
(7) Other remainders
a. Do not alter or bypass protective interlocks
b. The operation manual must remain attached to the machine at all times
c. Do not alter circuits and machine unless authorized to do so by the manufacturer.
d. All electrical apparatus must be properly grounded.
e. Wire the machine according to the local electrical code.
-2-
When the machine arrives in your warehouse, you need to use a forklift to
take it off from the pallet. If you could go down to the bottom side of
the machine, you would see an indication sticker as follows: (TP-601L)
position. After making few distance adjusting, you then could drive the
Follow this sticker and lead the teeth of a forklift to that indicated
teeth in and take off the machine.
(5) Attention
To Next Page
Loading...
