Fronius 10.0-3 208-240 - Installation Position of the Inverter

Do not install the inverter in:
- areas where there is an increased risk of accidents from farm
animals (horses, cattle, sheep, pigs, etc.)
- Stables or adjoining areas
- storage areas for hay, straw, chaff, animal feed, fertilizers, etc.
The inverter is designed to be dustproof in principle. However, in areas
of high dust accumulation, the cooling surfaces can become dusty,
which can impair the thermal performance. In this case, the dust must
be removed regularly. We therefore recommend that installation is not
carried out in areas and environments with high dust accumulation
(e.g., iron filings) as this can cause damage to the inverter.
Do not install the inverter in:
- Greenhouses
- Storage or processing areas for fruit, vegetables, or viticulture
products
- Areas used in the preparation of grain, green fodder, or animal
feeds
Installation posi-
tion of the
inverter
The inverter is suitable for vertical installation on a vertical wall or
column.
The inverter is suitable for a horizontal installation position.
The inverter is suitable for installation on a sloping surface.
Do not install the inverter on a sloping surface with the connections
upwards.
Do not install the inverter in a sloping position on a vertical wall or
column.
Do not install the inverter in a horizontal position on a vertical wall or
column.
10