0.6 in. (15 mm)
AC
~
PE
PE
1
OFF
1
PEPE
Torque (Nm /
lbf.in.) → see
printing near
wire terminal
PE
2
max. 80 A
AC ~
RCD
National Standards
?
Type A
YES
I
∆N
≥ 100 mA
§
3
If AC cables are laid over the shaft of the
DC main switch or across the DC main
switch connection block, the cables may
be damaged when the inverter is pivoted
or the inverter may not be able to be
pivoted.
IMPORTANT! Do not lay AC cables over the shaft of the DC main switch or across the
DC main switch connection block!
If excessively long AC or DC cables are
laid in loops in the connection area, fix the
cables to the designated eyelets at the top
and bottom of the connection block using
cable ties.
28
To Next Page
Loading...
