General
Device concept The CWF 25i wirefeeder is designed
for use with wirespools with a maxim-
um diameter of 300 mm (11.81 inch).
The standard 4-roller drive offers good
wirefeeding characteristics. The
wirefeeder is also suitable for long
hosepacks.
Due to its compact design, the
wirefeeder is a versatile product.
Field of applica-
tion
The CWF 25i wirefeeder can be used for all TIG welding operations in combina-
tion with the iWave 300i - 500i power sources. The wirefeeder is suitable for all
commercially available shielding gases.
Warning notices
on the device
The wirefeeder has safety symbols and a rating plate fitted. These safety symbols
and the rating plate must not be removed or painted over. The safety symbols
warn against operating the equipment incorrectly, as this may result in serious in-
jury and damage to property.
40,0006,3035
Caution: Parts may be at welding
voltage
Attention: Les pièces peuvent être
à la tension de soudage
0.1-25 m/min
40-984 ipm
360A/100% 450A/60% 500A/40%I2
1.2 A
I11
U11
60 V
U12 I12 0.5 A24 V
IEC 60 974-5/-10 Cl.A IP 23
www.fronius.com
Ser.No.:
Part No.:
Do not use the functions described here until you have fully read and understood
the following documents:
17
EN-US
To Next Page
Loading...
