Table of contents
Safety Instructions 5
Explanation of Safety Instructions 5
General 5
Intended Use 6
Environmental Conditions 6
Obligations of the Operating Company 6
Obligations of Personnel 6
Grid Connection 7
Personal Protection and Protection of Others 7
Data on noise emission values 7
Danger from toxic gases and vapors 8
Danger from Flying Sparks 8
Risks from grid current and welding current 9
Stray welding currents 10
EMC Device Classifications 10
EMC measures 10
EMF measures 11
Particular hazard areas 11
Requirement for the shielding gas 12
Danger from Shielding Gas Cylinders 12
Danger Posed by Shielding Gas Leak 13
Safety Measures at the Setup Location and During Transport 13
Safety Measures in Normal Operation 14
Maintenance and repair 14
Safety Inspection 15
Disposal 15
Safety symbols 15
Data backup 15
Copyright 15
General 17
Device concept 17
Field of application 17
Warning notices on the device 17
Operating controls, connections and mechanical components 19
Safety 19
Front, back 19
Left side, bottom 20
Before installation and initial operation 23
Safety 23
Intended use 23
Setup regulations 23
Placing the wirefeeder on the swivel pin holder 24
Safety 24
Placing the wirefeeder on the swivel pin holder 24
Connecting the wirefeeder to the power source 25
Safety 25
General 25
Connecting the wirefeeder to the power source 25
Connecting the wirefeeding hose/welding torch 28
Safety 28
Connecting the wirefeeding hose 28
Connecting the welding torch 28
Inserting/changing feed rollers 30
Safety 30
General 30
Inserting/changing feed rollers 30
Inserting the wirespool/basket-type spool 32
Safety 32
Inserting the wirespool 32
Installing the basket-type spool 33
3
EN-US
To Next Page
Loading...
