Fronius CWF 25i - Left Side, Bottom

(5) Welding torch connection / gas/current socket with bayonet latch
Option *
In combination with an iWave 300i - 500i AC/DC power source to con-
nect:
-
a TIG welding torch
-
the electrode cable for manual metal arc welding
In combination with an iWave 300i - 500i DC power source to connect:
-
a TIG welding torch
-
the electrode cable or grounding cable for manual metal arc welding
(depending on the type of electrode used)
(6) SpeedNet connection
For connecting the SpeedNet cable from the interconnecting hosepack
(7) Position for options
For example, wire end sensor
(8) Gas/current socket with bayonet latch
For connecting the gas/power cable from the interconnecting hosepack
(9) Shielding gas connection socket
For connecting the shielding gas hose from the interconnecting hosepack
(10) Coolant return connection (red)
Option *
For connecting the coolant return hose from the interconnecting hosep-
ack
(11) Coolant supply connection (blue)
Option *
For connecting the coolant supply hose from the interconnecting hosep-
ack
* The optional connections are present if the "OPT/i CWF TMC Torch" op-
tion is installed on the wirefeeder.
Left side, bottom
(1)
(2)
(3) (4) (5)
(6)
(7)
(8)
(9)
CWF 25i – left side
20