Connecting the wirefeeder to the power source
Safety
WARNING!
Danger from electrical current.
This can result in serious personal injury and damage to property.
▶
Before starting work, switch off all devices and components involved, and
disconnect them from the grid.
▶
Secure all devices and components involved so they cannot be switched back
on.
▶
After opening the device, use a suitable measuring instrument to check that
electrically charged components (such as capacitors) have been discharged.
General The wirefeeder is connected to the power source by means of the interconnect-
ing hosepack.
Connecting the
wirefeeder to the
power source
WARNING!
Danger from electric current due to defective system components and incor-
rect operation.
This can result in serious personal injury and damage to property.
▶
All cables, leads, and hosepacks must always be securely connected, undam-
aged, and correctly insulated.
▶
Only use adequately dimensioned cables, leads, and hosepacks.
Connecting the control line
1
25
EN-US
To Next Page
Loading...
