Fronius MagicWave 230i - Connecting the Mains Cable; General; Safety

40
Connecting the mains cable
General If power sources are delivered without a mains cable fitted, a mains cable that is suitable
for the connection voltage must be connected to the power source before commissioning.
The mains cable in included in the scope of supply of the power source.
Safety
WARNING!
Work that is carried out incorrectly can cause serious injury and damage.
► The following activities must only be carried out by trained and qualified personnel.
► Pay particular attention to the "Safety rules" sections in the power source and system
component operating instructions.
Connecting the
mains cable
Connect the mains cable:
- Plug in the mains cable
- Turn the mains cable 45° to the
right until you hear it latch into pla-
ce
1