Fronius MagicWave 230i - Page 59

59
EN
DownSlope
DownSlope, 2-step mode and spot welding
DownSlope, 4-step mode
Setting range: off; 0.1 - 30.0 s
Factory setting: 1.0 s
IMPORTANT! The saved DownSlope value applies to both the 2-step and 4-step modes.
Final current
Final current, 2-step mode and spot welding
Final current, 4-step mode
Setting range: 0 - 100% (of main current)
Factory setting: 30%
Balance
on MagicWave only
Balance = 15%
Balance = 35%
Balance = 50%
0.5 s 0.5 s
30%
xxA
30%
xxA
15%
+
-
35%
+
-
50%
+
-