Fronius RI FB PRO/i - Signal Mapping and Value Ranges; Data Types and Conversion Examples

Input and output signals
Data types The following data types are used:
-
UINT16 (Unsigned Integer)
Whole number in the range from 0 to 65535
-
SINT16 (Signed Integer)
Whole number in the range from -32768 to 32767
Conversion examples:
-
for a positive value (SINT16)
e.g. desired wire speed x factor
12.3 m/min x 100 = 1230
dec
= 04CE
hex
-
for a negative value (SINT16)
e.g. arc correction x factor
-6.4 x 10 = -64
dec
= FFC0
hex
Availability of in-
put signals
The input signals listed below are available from firmware V1.9.2 of the RI FB
PRO/i onwards.
30