* The terminating resistor on Fronius Smart Meters is installed between 33 and
34. The terminating resistor R 120 Ohm is included with the Fronius Smart
Meter.
Multi-meter sys-
tem - Explana-
tion of symbols
Grid
supplies the loads in the system if insufficient power is being gen-
erated by the PV modules or supplied by the battery.
Inverter in the system
e. g. Fronius Primo, Fronius Symo, etc.
Utility meter
Measures the measurement data relevant for billing amounts of
energy (in particular kilowatt hours of energy sourced from the
grid and energy fed into the grid). Based on the relevant billing
data, the electricity retailer will invoice the energy sourced from
the grid and the purchaser of the surplus energy will reimburse
the energy fed into the grid.
12
To Next Page
Loading...
