General
Device descrip-
tion
The Fronius Smart Meter is a bidirectional electricity meter which optimises self-
consumption and records the household's load curve. In conjunction with the
Fronius inverter, Fronius Datamanager and Fronius data interface, the Fronius
Smart Meter provides a clear overview of a user's own power consumption.
The meter measures the power flow to the loads or to the grid and forwards the
information via the Modbus RTU/RS485 communication to the Fronius inverter.
CAUTION!
Observe and follow safety instructions!
Failure to observe the safety instructions will result in damage to personnel and
equipment.
▶
Switch off the power supply before establishing a mains connection.
▶
Observe the safety instructions.
Symbols on the
device
Technical data, markings and safety symbols are located on the Fronius Smart
Meter. These must not be removed nor painted over. The notices and symbols
warn of incorrect operation that could result in serious injury and damage to
property.
Symbols on the rating plate:
CE mark
The devices conform to all the requisite and relevant standards and
guidelines that form part of the relevant EU directive, and are therefore
permitted to display the CE mark.
Regulatory Compliance Mark (RCM)
Complies with all applicable regulatory requirements in Australia and
New Zealand regarding safety and electromagnetic compatibility, as
well as specific requirements for radio equipment.
WEEE mark
In accordance with European Directive 2012/19/EU on waste electrical
and electronic equipment and its implementation in national law, used
electrical devices must be collected separately and recycled in an envir-
onmentally responsible manner. Ensure that you return your used
device to your dealer or obtain information regarding a local, authorised
collection and disposal system. Failure to comply with this EU Directive
may result in a negative impact on the environment and your health!
Positioning The Fronius Smart Meter can be installed at two possible locations in the system:
at the feed-in point and at the consumption point.
6
To Next Page
Loading...
