During certain operating phases the inverter may produce a
slight noise. For this reason, it should not be installed in an oc-
cupied living area.
Do not install the inverter in:
-
areas where there is an increased risk of accidents from
farm animals (horses, cattle, sheep, pigs, etc.)
-
Stables or adjoining areas
-
storage areas for hay, straw, chaff, animal feed, fertilizers,
etc.
The inverter is designed to be dustproof in principle. However, in
areas of high dust accumulation, the cooling surfaces can be-
come dusty, which can impair the thermal performance. In this
case, the dust must be removed regularly. We therefore recom-
mend that installation is not carried out in areas and environ-
ments with high dust accumulation (e.g., iron filings) as this can
cause damage to the inverter.
Do not install the inverter in:
-
Greenhouses
-
Storage or processing areas for fruit, vegetables, or viticul-
ture products
-
Areas used in the preparation of grain, green fodder, or an-
imal feeds
Installation posi-
tion of the in-
verter
The inverter is suitable for vertical installation on a vertical wall
or column.
The inverter is suitable for a horizontal installation position.
The inverter is suitable for installation on a sloping surface.
Do not install the inverter on a sloping surface with the connec-
tions upwards.
9
EN-US
To Next Page
Loading...
