General
Device concept The power source has the following
properties:
-
Compact dimensions
-
Robust plastic housing
-
Extremely reliable even under
harsh operating conditions
-
Carrying strap for easy transport
on construction sites, etc.
-
Protected controls
-
Current sockets with bayonet latch
In conjunction with the digital resonance inverter, an electronic regulator adapts
the power source characteristic to suit the welding electrode during welding. The
result is a lightweight and compact device with excellent ignition and weld prop-
erties.
The power source also features a Power Factor Correction, which adapts the cur-
rent consumption of the power source to the sinusoidal mains voltage. This res-
ults in numerous advantages for the user, such as:
-
Low primary current
-
Low conduction losses
-
Late tripping of the circuit breaker
-
Improved stability in the event of voltage fluctuations
-
Long mains leads can be used
-
In the case of multivoltage devices, a continuous input voltage range
When using cellulose electrodes (CEL), a dedicated operating mode can be
chosen for perfect welding results.
Warning notices
on the device
The warning notices and safety symbols on the power source must not be re-
moved or painted over. They warn against incorrect operation which can lead to
serious injury and damage.
Meaning of safety symbols on the device:
Welding is dangerous. The following basic requirements must be
met to ensure the equipment is used properly:
-
Welders must be sufficiently qualified
-
Suitable protective equipment must be used
-
All persons not involved must be kept at a safe distance from
the welding process
17
EN
To Next Page
Loading...
