Fronius TransPocket 180 - Control Panel

Control panel
(7)
(3)
(4)
(5)
(6)
(1)
(2)
(8)
(1) Setting value indicator
shows which setting value is selected:
-
Arc-force dynamic
-
Welding current
-
SoftStart / HotStart function
-
Pulse welding (only available for manual metal arc welding)
(2) Unit indicator
shows the unit of the value that is currently being changed with
the adjusting dial (7):
-
Time (seconds)
-
Percent
-
Frequency (Hertz)
(3) Setting value button
for selecting the desired setting value (1)
(4) Display
shows the current figure of the selected setting value
(5) Welding process indicator
shows which welding process is selected:
-
MMA welding
-
MMA welding with Cel electrode
-
TIG welding
(6) Welding process button
for selecting the welding process
25
EN