Fronius VarioSynergic 5000 - Wirefeeder Control Panel

8
Control panel on
VR 3000/3300
wirefeeder
Fig.8 Control panel on VR 3000/3300 wirefeeder
(14)
(9)
(14)
(9)
(9) Wirefeed speed adjuster
for adjusting the wirefeed speed
- m/min scale ... for continuous adjustment of the wirefeed speed from 1 - 18
m/min in manual mode
- % scale ... for correcting the programmed wirefeed speed (+/- 30%) in pro-
gram mode (depending on wire diameter, welding program, coarse and fine
stage switch)
(14) Operating mode selector switch
for selecting the operating mode
2-step mode
4-step mode
Interval 2-step mode
Interval 4-step mode
Spot welding
Feeder inching
Gas test