23
Caution! Risk of injury from welding wire emerging. Keep the welding torch
away from face and body when pressing the feeder inching button.
Feeding in the
welding wire
(continued)
Note! Adjust contact pressure in such a way that welding wire is not deformed,
but it is nevertheless ensured that the wire is transported properly.
Setting the
contact pressure
Contact pressure reference values
Semi-cylindrical rollers Trapeze rollers Plastic rollers
Aluminium 1,5 - 3,5 - 4,5
Steel 3 - 4 1,5 -
CrNi 3 - 4 1,5 -
To Next Page
Loading...
