EasyManua.ls Logo

FSI BM211 - Page 25

Default Icon
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2021 Flanders Scientic, Inc.
25
Return to Table of Contents
Video Menu
Signal Mode
Selecting ‘Film’ for this setting allows the monitor to compensate for material with 2:3 pulldown to provide a smoother image.
Selecting ‘TV’ for this setting processes the incoming video signal with no 2:3 pulldown compensation. Selecting ‘Auto’ will
automatically trigger ‘Film’ mode anytime 2:3 pulldown is detected.
Processing
The Processing setting has three options: Normal, Fast, & Noise Reduction. In Normal mode the monitor will display
interlaced video as interlaced and have a very low latency processing delay. In Fast mode the video processing delay is
further improved to provide the lowest possible processing latency, but ancillary functions and menu displays are updated
more slowly. In Noise Reduction mode video processing delay is increased to allow for additional noise reduction processing
and the monitor will deinterlace the signal and display it as progressive.
Show PsF as
Select between Interlaced or Progressive to instruct the monitor how to handle and show PsF content on screen. Set to
interlaced for lowest possible processing delay. Set to Progressive to see on screen as Progressive as intended. Please
note that some features, like Horizontal Audio Level Meters, are NOT compatible with ‘Show PsF as’ set to Progressive.
Sharpness Level
This function is a peaking level adjustment and produces an effect very similar to a physical aperture adjustment. By
adjusting sharpness lower the image will look softer and by adjusting sharpness higher the image will look sharper. Please
note that perceived sharpness may also be affected by video processing and pixel mapping settings.
Flicker Free Mode (Only applies to OLED units)
When turned ON this mode eliminates the low frame rate icker typical of OLED monitors with ultrafast pixel response times.
On is the default setting, we recommend keeping it activated.
Part Display
Toggles whether just the center part (On) or entire source (Off) is shown in Sub Window Mode.

Related product manuals