To Next PageTo Next PageWhat to do if the FSI Monitor image has a heavy green or magenta cast over SDI?
If the image on your FSI monitor displays a strong green or magenta tint when using SDI, adjust the SDI Format setting to align with your signal type. You can find this setting at the bottom of the Video Menu.
How to fix a heavy green or magenta cast over DVI on an FSI Monitor?
To resolve a heavy green or magenta cast on your FSI Monitor's image over DVI, configure the DVI Pixel Format selection within the System Menu to correspond with your signal format, whether it's RGB or YCbCr.
Instructions for safely connecting and disconnecting SDI BNC cables to prevent electrical discharge.
Guidance on preventing OLED burn-in from prolonged display of static content, overlays, or scopes.
Information regarding FCC compliance for the device, including limits for Class A digital devices.
Detailed explanation of the monitor's keyboard layout and the function of each key.
Overview of the various ports and connectors found on the back panel of the monitor.
Explains how to access and navigate the monitor's main menu system.
Details the information provided in the System Status menu, such as serial number and firmware version.
Guide on assigning user-selectable functions to the monitor's function keys (F1-F6).
Details on configuring and using the Real Time Waveform and Vectorscope features.
Setup and preference settings for various scopes and audio meters.
Controls and settings for video input, format, and processing.
Diagnostic modes for monitoring 3D signals without glasses.
Specifies how the monitor treats interlaced footage (Inter-Field vs Motion-Compensated).
Sets the type of Fast Mode processing for interlaced signals.
Configuration options for selecting audio sources and sync.
Settings for on-screen markers, graticules, and safety zones.
Configuration options for the monitor's alarm system and event monitoring.
Customization of on-screen display elements like status and time code.
Setting assignable functions for remote control via the GPI interface.
Controls for color space, gamma, temperature, and other color adjustments.
Explains Mesopic Optimization and its effect on dark saturated colors.
Details the ST2084 HDR Preview Modes for monitoring PQ signals.
Provides real-time YRGB measurements of any point or area within the signal.
Analyzes signal data at the pixel level, providing decimal or hexadecimal readouts.
Provides real-time chromaticity measurements and plots on a CIE diagram.
Maps full frame signal data onto a CIE diagram relative to active color space.
Highlights in-focus areas with a trace color, sensitivity adjustable.
Special monitoring mode for Control Room and QC stations with multiple displays.
Desqueezes HD signals from cameras using anamorphic lenses.
Resolving heavy green or magenta casts when using DVI input.
Resolving heavy green or magenta casts when using SDI input.
Reducing video processing delay using Fast Mode or progressive signals.
Troubleshooting unresponsive function buttons, often due to conflicting settings.
Addressing issues with rotary knobs, including phase lock and secondary functions.
Improving scope update speed by using single scope windows.
Ensuring audio/video sync by reducing video delay.
Troubleshooting image flickering, checking Flicker Free Mode and frame rate.
Addressing temporary image retention on LCDs by setting I->P Mode to Inter-Field.
Loading custom calibration 3D LUTs using software and a probe.
How to connect the DM Series Monitor to a network via an Ethernet cable.
Information on DHCP compatibility and viewing IP addresses.
Connecting the monitor directly to a PC or Mac via Ethernet.
Using FSI's IP Remote Utility for remote control of the monitor.
General