FSI BM211 - Page 36

© 2021 Flanders Scientic, Inc.
36
Return to Table of Contents
System Menu
Main Menu System
Function Load Prole
Scopes & Audio Meters Save Prole
Video Update Firmware
Audio Keypad LED Normal
Marker Chroma/Bright/Contrast Unlock
Alarm Luminance Interval On
OSD Udisk Mode On
GPI Language English
Color Management DHCP On
System IP Address 192.168.001.111
System Status Subnet Mask 255.255.255.0
Support RS422 Address 1
Baud Rate 9600
Parity None
DHCP
Toggle DHCP On or Off. DHCP allows your monitor to receive an IP address from a DHCP server on your network.
IP Address & Subnet Mask
You can manually congure network settings when DHCP is disabled.
RS422 Address, Baud Rate, & Parity
Set the monitor’s RS422 address for remote control and alarm monitoring. Baud Rate should remain at 9600 and Parity at
None unless otherwise specied by FSI Support.