7-2
*7) Braking time and duty cycle (%ED) are defined by cycle operation at the rated regenerative power as shown in the
figure below.
*8) Measured at 1m from inverter.
*9) Variations (Voltage: +10 to -10%, Frequency: +5 to -5%)
*12) Standstill means STBY function is not activated, cooling fan is stopped and inverter is supplied by means of normal
power supply (L1/L2/L3).
*13) Standby means STBY function is activated, cooling fan is stopped and inverter is supplied by a means of auxiliary
power supply (+24VDC).
*14) Rated current is for 45ºC, rated current in brakets corresponds to ambient temperature of 40ºC.
0
Cyclic period :T
0
Time [s]
Braking time : T
1
Reated regenerative power
％ED = ×100
T
1
T
0
Regenerative power [kW]
Braking time : T
1
To Next Page
Loading...
