2
2. Local Mode Screen 2-63
Local Mode Screen
6. Data transfer or comparison start
Check the storage information and press the [Start] switch.
During data transfer or comparison, the [Start] switch changes to [Transferring] and the
[Transferring data ... (Storage)] dialog is displayed.
7. Data transfer completed
On successful completion, the following message dialog is displayed. Press the [OK] switch.
* If any other message is displayed, refer to “Message Dialog Displayed during Data Transfer
(between V9 and Storage)” (page 2-65).
Data transfer or comparison start During data transfer or comparison
Data transfer or comparison completed
To Next Page
Loading...