Fuji Electric Monitouch V9 Series - Composition of Local Mode Screens

2
2. Local Mode Screen 2-5
Local Mode Screen
Composition of Local Mode Screens
The Local mode screens are configured as shown below:
[RUN] (refer to page 2-6)
[System Information]
(refer to page 2-7.)
[MONITOUCH Information] (refer to page 2-7.)
[Screen Data Information] (refer to page 2-8.)
[Driver Information] (refer to page 2-8.)
Local mode screen
[H/W Information] (refer to page 2-9.)
[Language Setting]
(refer to page 2-10.)
[Language Setting] (refer to page 2-10.)
[Keyboard] (refer to page 2-11)
[LAN Setting]
(refer to page 2-12.)
[IP Setting] (refer to page 2-13.)
[Network Table Edit] (refer to page 2-17.)
[E-Mail Setting]
(refer to page 2-33.)
[Connection Setting] (refer to page 2-34.)
[Mail Setting] (refer to page 2-35.)
[SRAM Setting] (refer to page 2-37.)
[Communication Setting]
(refer to page 2-39.)
[Simulator Setting] (refer to page 2-48.)
[System Setting]
(refer to page 2-49.)
[Buzzer Setting] (refer to page 2-50.)
[Backlight Setting] (refer to page 2-50.)
[Date/Time Setting] (refer to page 2-51.)
[I/O Check] (refer to page 2-66.)
[Touch switches and media] (refer to page 2-67.)
[User Settings] (refer to page 2-74.)
[Network Test] (refer to page 2-70.)
[Comm. Param.] (refer to page 2-41)
[Connection Target Setting] (refer to page 2-42.)
[Individual Parameter] (refer to page 2-42.)
[Storage Transfer] (refer to page 2-54.)
[Duplicate IP Test] (refer to page 2-72.)
[LAN2 Setting]
(Only for additional wired LAN I/F
models)
(refer to page 2-20.)
[IP Setting] (refer to page 2-20.)
[Network Table Edit] (refer to page 2-22.)
[WLAN Setting]
(Only for wireless LAN I/F models)
(refer to page 2-23.)
[IP Setting] (refer to page 2-24.)
[Wireless Setting] (refer to page 2-25.)
[Select AP to Connect] (refer to page 2-26.)
[Wireless Option] (refer to page 2-28.)
[Standards] (Only for wireless LAN I/F models) (refer to page 2-79.)
[VPN Setting] (refer to page 2-32.)
[Multi-Link] (refer to page 2-43.)
[Multi-Link2] (refer to page 2-44.)
[Option] (refer to page 2-19.)
[Option] (refer to page 2-22.)
[Cloud Setting] (refer to page 2-32.)
[Communication I/F Unit Parameters]
(refer to page 2-43.)
[OS Update] (refer to page 2-80.)
[RGB Adjustment] (refer to page 2-73.)
[LAN Unit Setting]
(Only with the CUR-03
communication I/F unit installed)
(refer to page 2-30.)
[IP Setting] (refer to page 2-30.)
[Network Table Edit] (refer to page 2-31.)
[Option] (refer to page 2-31.)