Fuji Electric Monitouch V9 Series - PLC 8 WAY Connection Status

1-28 4. Status Bar
PLC 8WAY Connection Status
This icon indicates the status of communication with the connected device when [Comm. Error
Handling: Disconnect] is selected.
When the PLC 8WAY connection status icon is pressed with no link established, the detailed
information can be viewed.
The information is updated every five seconds.
* If the PLC 8WAY connection status icon is pressed with a link established, nothing is displayed.
*1 For details on error messages, refer to “Error Messages” (page 3-11).
Link established Link not established When connected with the simulator *, the
following icon is displayed instead.
* For details on the simulator, refer to page
2-48.
Detailed information
Item Description
Time Displays the time when the communication error was detected.
Error message
*1
Displays the contents of the communication error.
Measure Displays a countermeasure to the communication error.