1
4. Status Bar 1-21
MONITOUCH Operations
Standard/Lite Models
Press the [SYSTEM] switch.
*
* If the status bar does not appear by pressing the [SYSTEM] switch, [System Switch Prohibited]
(page 1-6) or [Status Bar Prohibited] (page 1-22) was selected while editing the screen program on
V-SFT version 6.
Status Bar Types
The status bar includes the following icons.
Close
PLC 8WAY connection status
Wireless LAN status (only for wireless LAN I/F models)
LAN2 status (only for additional wired LAN I/F models)
LAN status
VNC connection status
VPN connection status
Display at all times valid/invalid
Item Description
Display at all times
Select whether or not to display the status bar at all times.
If valid, the status bar is displayed at all times even after the operation mode is switched
over between RUN and Local.
VPN connection status
This icon is shown during VPN connection.
When VPN connection is disabled, the icon disappears.
For details, refer to page 1-24.
VNC connection status
This icon is shown during connection with the VNC client.
When the client is disconnected, the icon disappears.
For details, refer to page 1-25.
LAN status
LAN2 status
This icon indicates the link status of the LAN/LAN2 connection.
For details, refer to page 1-26.
Display at all times: valid Display at all times: invalid
To Next Page
Loading...