Fuji Electric Monitouch V9 Series - Switching to Local Mode

2
1. Switching to Local Mode 2-1
Local Mode Screen
1. Switching to Local Mode
The procedure for switching from RUN mode to Local mode differs depending on the V9 series model.
Advanced Model
1. Press one corner of the screen
*1
for at least 2 seconds and release your finger when there is a
beep.
2. Then within one second, press a different corner
*1
and hold for at least 2 seconds to display the
system menu.
2 cm 2 cm
2 cm
2 cm 2 cm
2 cm
Recognition area
System menu