2-2 1. Switching to Local Mode
3. Press the [Local] switch on the displayed system menu.
*1 If any of the items given below are placed in a corner on the screen, the system menu will not be displayed. Be
sure to press a corner where none of the items are placed. If these items are placed in all four corners of the
screen, switch the screen to one that has open corners and perform the above procedure to display the system
menu.
Switches, data display parts with switches, display areas, scrolling messages, slider switches, scroll bars,
and table data display parts
*2 The splash screen can be changed as desired. For details, refer to V9 Series Reference Manual 2.
Splash screen
*2
Local mode screen
Progress bar
Message
To Next Page
Loading...