Fuji Electric Monitouch V9 Series - Duplicate IP Test

2-72 2. Local Mode Screen
17-3. Duplicate IP Test
The [Duplicate IP Test] tab window on the I/O Check screen allows you to check if there are any
duplicate IP addresses between the V9 series unit and the devices on the network.
Duplicate IP Test
1. Press [I/O Check] in the menu icons and open the [Duplicate IP Test] tab window.
2. Press the [Start Test] switch. The result is shown on the screen.
[Duplicate IP Test] tab window
When there is no duplicate IP address: When a duplicate IP address is found:
The MAC address of the device having a
duplicate IP address is displayed.