Fuji Electric Monitouch V9 Series - Wireless Setting

2
2. Local Mode Screen 2-25
Local Mode Screen
6-2. Wireless Setting
The [Wireless Setting] tab window on the WLAN Setting screen allows you to set the wireless LAN
operation mode and authentication method.
[Wireless Setting] tab window
Item Description
Status
Set whether to use (ON status) or not use (OFF status)
wireless LAN.
Operation
Mode
Access Point
Select when setting the V9 series unit as a wireless LAN
access point (base station).
Station
Select when setting the V9 series unit as a wireless LAN
station (client). Connection will be established at the
specified access point (infrastructure mode).
Ad Hoc
Select when setting the V9 series unit as a wireless LAN
station (client). Instead of an access point, a connection is
established between stations.
As ad-hoc specifications, only one device can be connected
at one time.
Antenna
PCB Select to use the built-in antenna of the V9 series unit.
External Use the optional “V9-ANT” antenna.
Channel
This setting is displayed when [Operation Mode] is set to
[Access Point].
Select an access point channel.
(1 to 11)
SSID
When [Operation Mode] is set to [Access Point], set the
SSID of the local station.
When [Operation Mode] is set to [Station] or [Ad-hoc], set the
SSID of the connection target.
(within 32 alphanumeric characters)
Authentication
Open System
Select the authentication method.
* When [Operation Mode] is set to [Ad-hoc], only [Open
System] is available.
WPA-PSK
WPA2-PSK
WPA-PSK/WPA2-PSK Auto
Encryption
Level
NONE
This setting is available when [Authentication] is set to [Open
System].
WEP
TKIP
This setting is available when [Authentication] is set to
[WPA-PSK/WPA2-PSK].
AES
TKIP/AES Auto
This setting is available when [Authentication] is set to
[WPA-PSK/WPA2-PSK Auto].
Security Key
Key Index 0 ~ 3 This item can be set when [Encryption Level] is set to [WEP].
Key Format
Hexadecimal Select the key format.
This item is not available when [Encryption Level] is set to
[NONE].
Tex t
Key field
*1
Input a key according to the authentication method and
encryption level.
This item is not available when [Encryption Level] is set to
[NONE].
Confirmation Key
*1