2-84 3. Handling Data Changed in Local Mode
V9 Series Local Mode
When the Local-mode prohibition setting has been made in V-SFT version 6, the menu icon displayed
in Local mode on the V9 series unit is changed as follows:
If a password has been registered in the [Prohibition Cancel Setting] window in V-SFT version 6, the
list of password-protected settings is displayed in the [Screen Data Information] tab window of the
System Information screen in Local mode.
To cancel all prohibition settings at once, follow the procedure described below.
1. Press [System Information] in the menu icons and open the [Screen Data Information] tab window
on the System Information screen.
Press anywhere on the area enclosed in the following figure. Then the system keyboard appears.
Enter the password.
“ ” is shown at the bottom
right on the menu icon of the
prohibited item.
Without prohibition setting With prohibition setting
Example: [LAN Setting] menu icon
[IP Setting] tab window on the LAN Setting screen
Grayed out and no
setting can be changed.
To Next Page
Loading...