3-10 1. Error Messages
• When [Comm. Error handling: Disconnect] is selected:
The status bar appears without displaying any error messages, and indicates the icon for “link not
established” for PLC 8WAY connection (page 1-28). When a time-out error is detected,
communication is discontinued and the next communication is attempted.
* Recovery confirmation can be executed for the device for which communication has been
discontinued.
For details, refer to the V9 Series Connection Manual.
The icon appears at the top right
corner of the part that monitors the
device memory of a device in which a
time-out error was detected.
To Next Page
Loading...