1-10 3. System Menu
User List
Users registered for the security function are displayed in list form. In this list, a new user account can
be added and the registered user accounts can be deleted or edited.
* To display a list of all users in Local mode, refer to “User Settings” (page 2-74).
Administrator Authentication
Perform authentication to display the user list.
1. Display the system menu
(*)
, press [Security] in the system menu and press the [User Settings]
switch.
* For details on how to display the system menu, refer to page 1-6.
2. The administrator authentication screen is displayed. Enter an administrator name and password,
and press the [OK] switch.
3. Registered user accounts are listed as shown below.
* Press [Security] in the system menu or press the [SYSTEM] switch to hide the system menu
(only with Standard/Lite models). Then administrator authentication is automatically cancelled.
To display the user list by pressing [Security] in the system menu, a user with administrator
privileges must log in (administrator authentication).
Pressing each setting field
brings up the system
keyboard to be used for
configuration.
Registered user accounts
are listed.
To Next Page
Loading...