2
2. Local Mode Screen 2-27
Local Mode Screen
Setting the Access Point for Connection
1. Press [WLAN Setting] in the menu icons and open the [Select AP to Connect] tab window.
2. Press the [Search Nearby] switch.
Information of nearby access points is displayed in descending order of signal strength.
* For details on signal strength, refer to page 1-27.
3. Select the access point to connect to and set the key index and password as required.
4. Press the [Apply] switch to confirm the settings. Connection with the specified access point
becomes possible.
Be sure to press the [Apply] switch on the [Select AP to Connect] tab window.
To Next Page
Loading...