Fuji Electric NP1L-RS1 User Manual

1-4
1-4 Product Versions and Supported Functions
For the general purpose communication module, supported functions and available FBs depend on the product version.
1-4-1 Supported functions
Note 2: : supported : Not supported
noisrevdnatamroF 1noitcnufredaoldesab-medoM 2noitcnufredaoldesab-medoM
1301.V1SR-L1PNnahtreilraExx
1301.V2SR-L1PNnahtreilraExx
1301.V4SR-L1PNnahtreilraE1etoN— 1etoN—
retalro1301.V1SR-L1PNox
retalro1301.V2SR-L1PNox
retalro1301.V4SR-L1PN1etoN— 1etoN—
retalro5352.V1SR-L1PNoo
retalro5352.V2SR-L1PNoo
retalro5352.V4SR-L1PN1etoN— 1etoN—
Note 1: The modem-based loader functions are functions which realize remote operation and programming by connecting
a modem to the RS-232C port and using the public circuit. These functions cannot be used with the NP1L-RS4
which is provided only with the RS-485 port.
Note 2: With modem-based function 1, the transmission rate between this module and a commercial modem is fixed to
19200 bps. With modem-based function 2, the transmission rate can be selected from 9600, 19200, and 38400
bps.
1-4-2 Available standard extended FB
emaNBF weivrevOBF
larenegfonoisrevelbacilppA
noitacinummocesoprup
eludom
eerf_C_sdrow215:evieceRsdrow215:dneSBFlarudecorp-noN
252rfC_sdrow252:evieceRsdrow252:dneSBFlarudecorp-noN
821rfC_sdrow821:evieceRsdrow821:dneSBFlarudecorp-noN snoisrevllA
46rfC_sdrow46:evieceRsdrow46:dneSBFlarudecorp-noN
23rfC_sdrow23:evieceRsdrow23:dneSBFlarudecorp-noN
rprfC_
locotorpnoitacinummocotnitliubhcihwBFerudecorp-noN
sdrow215:evieceRsdrow215:dneS
noitacinummocehtfotrapagnimrofrepybdecudersiyticapacmargorpehT
.eludomehthtiwgnissecorp
retalro5352.V
2PRfC_
locotorpnoitacinummocotnitliubhcihwBFerudecorp-noN
sdrow215:evieceRsdrow215:dneS
noitacinummocehtfotrapagnimrofrepybdecudersiyticapacmargorpehT
ebnacgnissecorpnoitacinummoc,noitiddanI.eludomehthtiwgnissecorp
.stropegassemsubXSowtgnisuybdeeps-hgihebam
retalro6352.V
NRFdfC_seiresCINERFretrevnIIJUFroF 1etoNsnoisrevllA
RVFdfC_)SUB-IGF(seires11C-RVFretrevnIIJUFroF 1etoNsnoisrevllA
rprvfC_
)SUB-IGF(seires11C-RVFretrevnIIJUFroF
noitacinummocehtfotrapagnimrofrepybdecudersiyticapacmargorpehT
.eludomehthtiwgnissecorp
1etoNretalro6352.V
XYPdfC_seiresHYPdnaseiresXYPretaehIJUFroF 1etoNsnoisrevllA
KPdfC_seires2KPredaeredocrabIJUFroF 2etoNsnoisrevllA
Note 1: This FB uses the RS-485 port. Cannot be used with the NP1L-RS2 which is provided only with the RS-232C port.
Note 2: This FB uses the RS-232C port. Cannot be used with the NP1L-RS4 which is provided only with the RS-485 port.

Fuji Electric NP1L-RS1 Specifications

General

Brand	Fuji Electric
Model	NP1L-RS1
Category	Control Unit
Language	English