Fuji Electric NP1L-RS1 - Appendix 3-6 Detailed RAS

App.3-4
Appendix 3-6 Detailed RAS
(Related page: p7-3)
No. 4 and No. 5 information newly added to detailed RAS information.
(To NP1L-RS3 module. Currently, NP1L-RS1/RS2/RS4 doesn’t support this information.)
0
Status of general purpose
communication module
1
Status of CH1
2 Status of CH2
3
Not used
4
Self-diagnostic 1
5
Self-diagnostic 2
6
Not used
7
Not used
8 Number of parity error occurrences
9
Number of framing error occurrences
10
Number of overrun error occurrences
11
Send buffer overflow
12 Receive buffer overflow
13 Loopback buffer overflow
No.4 (Self-diagnostic 1)
Bit 0: External RAM abnormal
Bit 1 to 15: Not used
No.5 (Self-diagnostic 2)
15
14
13 12 11 10 9 8 7 6 5 4 3
2
10
CH1 CTS ON abnormal
CH1 CTS OFF abnormal
CH1 DSR ON abnormal
CH1 DSR OFF abnormal
CH2 CTS ON abnormal
CH2 CTS OFF abnormal
CH2 DSR ON abnormal
CH2 DSR OFF abnormal
Not used
Not used
Not used
Not used
CH1 Send/Receive data abnormal (SD RD) (Send data error detected)
CH1 Loop back abnormal (SD RD) (Communication error detected)
CH2 Send/Receive data abnormal (SD RD) (Send data error detected)
CH2 Loop back abnormal (SD RD) (Communication error detected)
RS-232C
Appendix 3 Additional explanation
for NP1L-RS3