Glossary
411
Appendix
13
Default Screen A screen displayed on the touch screen immediately after
switching the power on, or pressing the <Clear All> button.
The screen is also displayed when the Auto Clear feature is
used.
Default Value A factory default value, or a value set in System Administration
mode.
Dial In this guide, it refers to entering a recipient's fax number.
The methods of dialing provided by the machine include:
manual dialing using the numeric keypad, speed dialing, one
touch dialing, and using the address book, etc.
Dial Tone A tone generated from the telephone line. It indicates that you
are connected to the line.
Dial Type The dial type of connected line. The machine offers two dial
types: Tone (push circuit) and 10PPS (dial circuit / 10PPS).
Direct Internet Fax Allows you to send e-mail directly to Internet Fax-compatible
machines without going through the SMTP server, while
Internet Fax uses the SMTP server to send e-mail.
Document Image An image of a document scanned by the machine.
DPI An abbreviation of Dots Per Inch. A unit used to describe
printing resolution in terms of the number of dots printed in one
inch. Used as a unit to describe resolution.
ECM An abbreviation of Error Correction Mode.
A type of G3 transmission. ECM transmission sends the
document image data in segments and retransmits segments
that the remote machine receives incorrectly.
"ECM" described on an Activity Report shows that the
communication was processed using ECM.
Edge Erase A feature that erases the top/bottom, left/right or center edge
of a document image when copying.
Emulation This refers to operating the printer to achieve the same print
results as when printing with other manufacturers' printers.
This mode is called Emulation Mode.
Energy Saver Feature A feature that switches the machine status to standby after a
period of inactivity.
The following energy saver features can be set for the
machine.
Low Power Mode: The power to the fusing unit and motor is
lowered when the machine is left unused
for a fixed amount of time. The touch
screen goes out, and the <Energy Saver>
button lights up.
Sleep Mode: Most of the units in the machine are in
standby status. The machine consumes
the least power.
Error Code A code is displayed on the touch screen or a report when a
problem occurs.
Term Description
To Next Page
Loading...
Need help?
General
