Checking/Operating Files in a Folder
325
Send from Folder
6
Checking/Operating Files in a Folder
You can check or operate files stored in a folder.
Note • When selecting print files, [Job Flow Settings] may not be available for some models.
1 Select a folder on the [Send from Folder]
screen.
2 Select the display style from [List] and
[Thumbnail].
3 Select a file.
Note • Select [ ] to return to the previous screen or [ ] to move to the next screen.
• You can sort files in ascending or descending order by selecting either [File Name] or [Date
& Time].
• At the left of each file name, an icon is displayed to show the file type.
: Scan file
: Print file
: File for Secure Polling
: Fax/IP Fax (SIP) file
: Internet Fax file
• You can select up to 100 files separately, or select all files at a time. If you select files
separately, a number appears to the left of the icon indicating the order in which it was
selected. Files are processed in this order.
4 Select any option.
Refresh
Displays the updated information.
List
Lists the files stored in the folder, with the dates the files were stored and the number
of pages.
To Next Page
Loading...
