Accessing Web Applications
355
Web Applications
9
Accessing Web Applications
The following describes how to access web applications.
You need to register an access destination in advance.
For information on how to register an access destination, refer to "5 Tools" > "Web Applications Service
Setup" > "Server Setup" in the Administrator Guide.
1 Press the <Services Home> button.
2 Select [Web Applications].
Note • If Auto Link has been set, the machine
can access the remote service.
3 Select an access destination.
4 Select [Open] from the pop-up menu
displayed.
Open
Accesses the specified remote service.
Details
Displays information on the specified remote service.
Close Menu
Hides the pop-up menu.
<Services Home> button
To Next Page
Loading...
